The MB 250/50 frost protected Safety Shower combination complete with Eyebath/Face wash fountain. Suitable for outdoor use. Shower is insulated covered with a jacket and provided with trace tape heating. The jacket is covered with very good visual green/white stripes! Our special showerhead is also present on this unit 60° and rotation. Stainless Steel pull rod for operation. "Unbreakable" Eyebath is having Perlators / Diffusers for a gentle soft flow and has a hinged lid for operation (when you pull the lid forward eyebath is activated), also a flow controller is present on the unit. After usage the Eyebath drains empty! Material: Galvanised Carbon Steel (Stainless Steel is also possible). Water connection: 1 ¼" BSP male (can have a different connection according to your specifications!) at the bottom (standard) or at the top, minimum water pressure 2 Bar G. Electrics 230 Volt, Flame Proof! Standard the Eyebath (MB 50) is positioned in front position, but can be placed as well on 90°, 180°, 270° or we can position the Eyebath on a certain distance (not too far) from the standpipe from the Safety Shower. Several options can be combined with this Shower like f.e.; Pictogram (Sign), Light, Proximity switches, Automatic Flush units, Cabin/booth, Treadle foot control, Panel foot control, etc..
Underground extension Frost protection between water supply (± 80 cm below ground level) and Safety Shower. According same principle (insulated and trace tape heated) of the Shower, MB 700. This unit is very easy to install. Or we can deliver extra tracing at the water supply, which you can put along the water connection pipe, this needs to be insulated afterwards!