Home >> Air supplied complete suit with motor and filters (PAPR) (limited life use)

block-placeholder

Contact information:

icoon_telefoon
+31 (0)299 684468
icoon-econt

Matcon B.V.

Insulindeweg 15
1462 MJ Middenbeemster
Nederland

fax. +31 (0)299 684374

KvK.: Alkmaar 37093381

Contact form:

A
Air supplied completed suit with motor and filters (PAPR) (limited life use)Air supplied completed suit with motor and filters (PAPR) (limited life use)Air supplied completed suit with motor and filters (PAPR) (limited life use)Air supplied completed suit with motor and filters (PAPR) (limited life use)Air supplied completed suit with motor and filters (PAPR) (limited life use)Air supplied completed suit with motor and filters (PAPR) (limited life use)

Air supplied complete suit with motor and filters (PAPR) (limited life use)

The Matcon line of air supplied protective clothing is a result of long research and developments. Independent studies / tests meet the stringent requirements of European CE regulations. The range consists out of a; hood, half suit (blouse) and full suit.
 
The line of clothing is made in a wide range of materials and laminate-coated fabric in order to provide protection against chemical liquids, gases, dust, aerosols and radio active particles protection. The air system provides the whole suit of air. A wide panoramic visor flexible or rigid visor possibly with an additional cross visor. The spacious main area offers plenty of freedom of movements and maximum visibility. All suits contain sufficient exhalation valves so that an excess pressure vented and that and a pressure remains within the suit. Eyelets are attached to make sure that the suit may be to the suspension frame (3 point pendant) if the suit is not in use. Properly stowed
 
In this case, the air is sucked in via a suction motor (PAPR) with filters and the suit is fed.
 

Also in this case the suit is made of a material with a limited life use, but it can also be made of a reusable material.

 
The suit is equipped with fixed connected and is  a cuff system for the exchange of the gloves.  Also the legs are fixed connected in order to realize a complete suit.  Per minute  55 liters of cool air supplied to each arms and legs for ventilation.
 
The suits are user friendly to work with and developed for practical use.
 
Available in different materials:
PVC, antistatic and flame retardant PVC, Neoprene, Hypalon, Butyl, Viton, MAT TECH (material with limited useful life), etc.
Extra options: 
  • Zipper options
    • Plastic zipper with double guide
    • Metal zipper with single guide
    • Liquid and gas tight zipper

All zippers are horizontal chest fixed and protected by a flap which can be loose, performed with velcro or performed with snaps, but the zip can also be positioned at the side or at the back.

  • Extra outer visor (0,5 mm with Velcro spots for connection or 0,2 mm with double sided tape)
  • Flow controller
  • Cooling of Heater of the air.
  • Available in different materials:
    • PVC, antistatic and flame retardant PVC, Neoprene, Hypalon, Butyl, Viton, MAT TECH (material with limited useful life), etc.
  • Visor options:
    • 1.5mm hard / rigid wide visor possibly with an additional cross visor
    • totally transparent flexible visor,  offers a 360° panoramic view 
  • Trouserleg options:
    • single plain leg
    • Elastic inner leg with elastic strap and a straight outer leg
    • Elastic inner leg with an elastic footstrap and elastic outside leg
    • Sock option with straight outer leg
    • Sock option with elastic outer leg
    • Solid safety boots with steel toe cap and midsole which are -permanently attached to the suit.

 

Request a quote

More information

Download PDF version

Download a PDF of this product.

Printer-friendly version

Print out a printer-friendly version of this page.

Matcon service

Matcon B.V.
Insulindeweg 15
1462 MJ Middenbeemster
Nederland

tel. +31 (0)299 684468
fax. +31 (0)299 684374

KvK.: Alkmaar 37093381