- Water connection:½” BSP Male or 15 mm compression fitting or different on your request
- water pressure minimum 2 bar maximum 8 bar
- water supply: 12 liter per minute
- manual operation
- color: different colors possible, standard green / white
- Instanteneous heater: mechanical control, more influenced by pressure differences, heater meets CE standards
- material: galvanized steel, Stainless Steel, brass, plastic
- dimensions 380x400x270 mm (WxDxH)
- Floor mounting plate 150x150 mm, 4 holes (Ø 15 mm) H.t.H. 100 mm
- meets the following standards: CE EN 15154 & ANSI Z 358.1
GENERAL ID continuous warm water eyebath MB 30
The GENERAL CONTINUOUS WARM WATER EYEBATH MB 30 ID Eyebath / Face Wash Fountain with unlimited heated water (approximately 25°C) suitable for indoor use and floor mounting (wall mounting is also possible). This model has a 1¼” or 1" BSP standpipe and Floor mounting plate and is provided with the... View full product description
Request a quote
You usually receive a quote within 1 working day and, provided we have sufficient information. We send the General Terms and Conditions simultaneously with the offer.
Description
The GENERAL CONTINUOUS WARM WATER EYEBATH MB 30 ID Eyebath / Face Wash Fountain with unlimited heated water (approximately 25°C) suitable for indoor use and floor mounting (wall mounting is also possible). This model has a 1¼” or 1″ BSP standpipe and Floor mounting plate and is provided with the MB 30 Eyebath / Face Wash Fountain with an open Stainless Steel or Plastic bowl. This Eyebath is equipped with a general heater. The heater is standard built in a IP24 housing but can also be built in a IP66 (spray tight) cabinet. The Eyebath has dust covers on the diffusers optional supplemented with black rubber eye cups with hinged dust covers (including sign). These diffusers give a gentle aerated soft spray pattern which feels pleasant for the eyes. The operation will be done by means of the Stainless Steel Push Flag. The dust covers need to be placed back on the diffusers after usage. A drain is present on the bowl. Also a Flow regulator is present on the unit in order to achieve a good spraying pattern. The Eyebath can drain automatically empty after usage. The standpipe is standard the drain, but can also be the water supply (please specify when ordering). The unit can be built suitable for outdoor use (frost protected). The Eyebath can be connected on to the ordinary cold water supply, the heater warms the water to an acceptable and nice temperature unlimited. Electrical connection for this model 380 V / 18 kW. Minimum water pressure is 2 bar.
