- Water connection: ½” BSP Male or 15 mm compression fitting or different on your request
- water pressure minimum 2 bar maximum 8 bar
- water supply: 12 liter per minute
- Heater Insulinde: better spraying pattern, less dependent on pressure differences, computer-controlled, meets the CE and KEMA standards as a whole
- manual operation
- color: different colors possible, standard green / white
- material: galvanized steel, Stainless Steel, brass, plastic
- dimensions 320x320x1250 mm (WxDxH)
- Floor mounting plate 150x150 mm, 4 holes (Ø 15 mm) H.t.H. 100 mm
- meets the following standards: CE EN 15154 & ANSI Z 358.1
MB 75 eyebath incl insulinde continuous warm water heater
The MB 75 Eyebath / Face Wash Fountain incl insulinde continuous warm water heater with unlimited heated water (approximately 25°C) suitable indoor use and for floor mounting (wall mounting is also possible). This model has a 1¼” or 1" BSP standpipe and Floor mounting plate and is provided wit... View full product description
Request a quote
You usually receive a quote within 1 working day and, provided we have sufficient information. We send the General Terms and Conditions simultaneously with the offer.
Description
The MB 75 Eyebath / Face Wash Fountain incl insulinde continuous warm water heater with unlimited heated water (approximately 25°C) suitable indoor use and for floor mounting (wall mounting is also possible). This model has a 1¼” or 1″ BSP standpipe and Floor mounting plate and is provided with the MB 75 Eyebath / Face Wash Fountain which has an “unbreakable” ABS bowl and hinged lid (including sign). The lid is at the same time the operation of the Eyebath (pull backwards down and the water starts running). When the lid is pushed back and closed the eyebath stops automatically. Because of this hinged lid the Eyebath remains clean and hygienic.
This Eyebath is equipped with an “Insulinde” heater. The heater is built in a IP66 (spray tight) cabinet. The Eyebath is equipped with diffusers (optional supplemented with black rubber Eye cups) which gives a gentle aerated soft spray pattern which feels pleasant for the eyes. A drain is present on the bowl. Also a Flow regulator is present on the unit in order to achieve a good spraying pattern. The Eyebath can drain automatically empty after usage. The standpipe is standard the drain, but can also be the water supply (please specify when ordering). The unit can be built suitable for outdoor use (frost protected). The Eyebath can be connected on to the ordinary cold water supply, the heater warms the water to an acceptable and nice temperature unlimited. Electrical connection for this model 380 V / 10,5 kW. Minimum water pressure is 2 bar.
Read more about warm water
