Home >> Safety showers >> MB 150 >> MB 150/50 Combination Safety Shower and Eyebath
Tank Shower and Mobile ShowerMB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)MB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)MB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)Tank ShowerComplete suitCombination Shower and Tank ShowerChem 100 Splash Suit and Chem-Buster 1MB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)

Contact information:

icoon_telefoon
+31 (0)299 684468
icoon-econt

Matcon B.V.

Insulindeweg 15
1462 MJ Middenbeemster
Nederland

fax. +31 (0)299 684374

KvK.: Alkmaar 37093381

Contact form:

A
MB150/50 Combination Safety Shower and EyebathMB150/50 Combination Safety Shower and EyebathMB150/50 Combination Safety Shower and EyebathMB150/50 Combination Safety Shower and Eyebath

MB 150/50 Combination Safety Shower and Eyebath

The MB 150/50 Combination Emergency Safety Shower / Body Shower or Drench Shower / Deluge Shower including Eyebath / Face Wash Fountain suitable for indoor use and floor mounting. This model has a 1¼” BSP standpipe and Floor mounting plate and is combined with the MB 50 Eyebath / Face Wash Fountain which has an “unbreakable” ABS bowl and hinged lid (including sign). The lid is at the same time the operation of the Eyebath (pull forwards down and the water starts running). When the lid is pushed back and closed the eyebath stops automatically. Because of this hinged lid the Eyebath remains clean and hygienic.

 

The Eyebath is equipped with diffusers (optional supplemented with black rubber Eye cups). These diffusers give a gentle aerated soft spray pattern which feels pleasant for the eyes. A drain is present on the bowl of the Eyebath. Also a  Flow regulator is present on the unit in order to achieve a good spraying pattern. The Eyebath can have an option that the Eyebath drains empty after usage. Standard we have a bottom water inlet, but this can be changed to any position you require. Special Shower head (spray angle 60° and gives rotation to the water) for an effective and efficient operation. Stainless Steel operation Pull rod for Body shower activation. Minimum water pressure is 2 bar. 

 

Click on the blue button to see a unique and detailed interactive 3d model of the MB 150 serie. With this you can have a 360 degrees view of the MB 150 series and the most relevant product options. Other shower models are also available in 3d.

 

View interactive 3d model

3d icoon

 

 

Specifications: 
  • Water connection: 1¼” BSP Female or different on your request
  • water pressure 2 bar
  • Body Shower water supply: 60 or 80 liter per minute
  • Eyebath water supply: 12 liter per minute
  • manual operation
  • bottom of standpipe can be water supply or drain
  • color: different colors
  • material: galvanized steel (possible with coating), Stainless Steel, brass, plastic
  • Floor mounting plate 230x230 mm, holes 4xø15 mm H.t.H. 180 mm
  • meets the following standards: CE EN 15154  & ANSI Z 358.1
Extra options: 
  • foot pedal
  • proximity switch
  • automatic flushing unit
  • cabin / booth
  • flow regulator
  • filters
  • light
  • sign
  • hand held shower
  • black rubber eye cups
  • heater
  • Y-strainer filter
  • mixing valve
  • panel type foot control
  • more options on request
Request a quote

Matcon service

Matcon B.V.
Insulindeweg 15
1462 MJ Middenbeemster
Nederland

tel. +31 (0)299 684468
fax. +31 (0)299 684374

KvK.: Alkmaar 37093381