Home >> Safety showers >> MB 250 >> MB 250/75 + insulinde continuous warm water heater

Contact information:

icoon_telefoon
+31 (0)299 684468
icoon-econt

Matcon B.V.

Insulindeweg 15
1462 MJ Middenbeemster
Nederland

fax. +31 (0)299 684374

KvK.: Alkmaar 37093381

Contact form:

A
Matcon - MB 250/75 + insulinde continuous warm water heater

MB 250/75 + insulinde continuous warm water heater

The MB 250/75 + "Insulinde" INSTANTENEOUS HEATER Combination Emergency Safety Shower / Body Shower or Drench Shower / Deluge Shower including Eyebath / Face Wash Fountain with unlimited heated water (approximately 25°C) for the Eyebath / Face Wash Fountain suitable for outdoor use (frost protected) and floor mounting. The insulated stand pipe is equipped with heat tracing (on request the tracing can be omited). This model has a 1¼” BSP standpipe and Floor mounting plate and is combined with the MB 75 Eyebath / Face Wash Fountain with “unbreakable” ABS bowl and hinged lid (including sign). The lid is at the same time the operation of the Eyebath (pull backwards up and the water starts running). When the lid is pushed back and closed the eyebath stops automatically. Because of this hinged lid the Eyebath remains clean and hygienic. On the interior of the lid a mirror is present. This model is a larger version of the MB50. This Eyebath is equipped with an "Insulinde" heater. The heater is built in a IP66 (spray tight) cabinet and is frost protected. Eyebath is equipped with diffusers (optional supplemented with black rubber Eye cups) which give a gentle aerated soft spray pattern which feels pleasant for the eyes. A drain is present on the bowl. Also a Flow regulator is present on the unit in order to achieve a good spraying pattern. The Eyebath drains automatically empty after usage. Standard we have a bottom water inlet, but this can be changed to any position you require. Special Shower head (spray angle 60° and gives rotation to the water) for an effective and efficient operation. Stainless Steel operation Pull rod for Body shower activation. Electrical connection for this model 380 V / 10,5 kW. Minimum water pressure is 2 bar. 


Read more about warm water

matcon blog icoon
Specifications: 
  • Water connection: 1¼” BSP Male or different on your request
  • water pressure minimum 2 bar maximum 8 bar
  • Body Shower water supply: 60 or 80 liter per minute
  • Eyebath water supply: 12 liter per minute
  • Heater Insulinde: better spraying pattern, less dependent on pressure differences, computer-controlled
  • meets the CE and KEMA standards as a whole
  • manual operation
  • color: different colors possible, standard green / white
  • material: galvanized steel, Stainless Steel, brass, plastic
  • Floor mounting plate 230x230 mm, holes 4xø15 mm H.t.H. 180 mm
  • meets the following standards: CE EN 15154 & ANSI Z 358.1
Extra options: 
  • foot pedal
  • proximity switch
  • automatic flushing unit
  • cabin / booth
  • flow regulator
  • filters
  • light
  • sign
  • hand held shower
  • black rubber eye cups
  • Y-strainer filter
  • mixing valve
  • panel type foot control
  • thermostat
  • frost free connection piece MB 700
  • more options on request
Request a quote

More information

Download a PDF of this product page.

Print out a printer-friendly version of this page.

Matcon service

Matcon B.V.
Insulindeweg 15
1462 MJ Middenbeemster
Nederland

tel. +31 (0)299 684468
fax. +31 (0)299 684374

KvK.: Alkmaar 37093381