Home >> Safety showers >> MB 250 >> MB 250/80 Combination Safety Shower and Eyebath
Combination Shower and Tank ShowerMB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)Chem 100 Splash Suit and Chem-Buster 1Complete suitMB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)MB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)MB 23 Mobile Safety Shower & Eyebath Frost-protected (Heavy duty)Tank ShowerTank Shower and Mobile Shower

Contact information:

icoon_telefoon
+31 (0)299 684468
icoon-econt

Matcon B.V.

Insulindeweg 15
1462 MJ Middenbeemster
Nederland

fax. +31 (0)299 684374

KvK.: Alkmaar 37093381

Contact form:

A
MB 250/80 Combination Safety Shower and Eyebath

MB 250/80 Combination Safety Shower and Eyebath

The MB 250/80 Combination Emergency Safety Shower / Body Shower or Drench Shower / Deluge Shower including Eyebath / Face Wash Fountain suitable for outdoor use (frost protected) and floor mounting. The insulated stand pipe is equipped with heat tracing (on request the tracing can be omited). This model has a 1¼” BSP standpipe and Floor mounting plate and is combined with the MB 80 Eyebath / Face Wash Fountain with Stainless Steel bowl and Stainless Steel hinged lid (including sign). The lid is at the same time the operation of the Eyebath (pull backwards up and the water starts running). When the lid is pulled back and closed the eyebath stops automatically. Because of this hinged lid the Eyebath remains clean and hygienic. The Eyebath is equipped with diffusers (optional supplemented with black rubber Eye cups). These diffusers give a gentle aerated soft spray pattern which feels pleasant for the eyes. A drain is present on the bowl of the Eyebath. Also a  Flow regulator is present on the unit in order to achieve a good spraying pattern. The Eyebath drains automatically empty after usage. Standard we have a bottom water inlet, but this can be changed to any position you require. Special Shower head (spray angle 60° and gives rotation to the water) for an effective and efficient operation. Stainless Steel operation Pull rod for Body shower activation. This model is frost protected up to and including -30°C, at your request it is also possible to obtain a model suitable for lower temperatures. Minimum water pressure is 2 bar. 


There is also the possibility to protect the water supply pipe against frost with the extra tracing or the MB 700.

Specifications: 
  • Water connection: 1¼” BSP Female or different on your request
  • water pressure 2 bar
  • Body Shower water supply: 60 or 80 liter per minute
  • Eyebath water supply: 12 liter per minute
  • manual operation
  • color: different colors
  • material: galvanized steel, Stainless Steel, brass, plastic
  • Frost protected up to and including -30°C
  •  Floor mounting plate 230x230 mm, holes 4xø15 mm H.t.H. 180 mm
  • meets the following standards: CE EN 15154  & ANSI Z 358.1
Extra options: 
  • foot pedal
  • proximity switch
  • automatic flushing unit
  • cabin / booth
  • flow regulator
  • filters
  • light
  • sign
  • hand held shower
  • black rubber eye cups
  • heater
  • Y-strainer filter
  • mixing valve
  • panel type foot control
  • thermostat
  • frost free connection piece MB 700
  • more options on request
Request a quote

More information

Download PDF version

Download a PDF of this product.

Printer-friendly version

Print out a printer-friendly version of this page.

Matcon service

Matcon B.V.
Insulindeweg 15
1462 MJ Middenbeemster
Nederland

tel. +31 (0)299 684468
fax. +31 (0)299 684374

KvK.: Alkmaar 37093381